Wednesday, April 19, 2017

Seasonal Oil Changes

For many drivers, budding trees in spring and changing leaves in fall signal the time for an oil change. If you ask them why, they’ll likely just shrug and says it’s what they’ve always done.
The reasons are more nuanced than you think. One involves marketing. Another spans 1,500 miles and marked a technological leap for the industry.
The thick and thin of viscosity
To understand the story, you need to understand motor oil viscosity.
amsoil dealerViscosity is the measurement of a lubricant’s resistance to flow, but it’s easier to think of it as a lubricant’s thickness. Lower numbers indicate thinner oils, which flow better at cold temperatures. Today, motorists are used to multi-grade oils, such as 5W-30. In the early 20th Century, things were different. Motor oil was classified under a monograde designation (SAE 10, 20, 30, 40 or 50) based on its flow rate at 212ºF, or normal operating temperature.
As more motorists began buying cars and changing oil, it became evident that some monograde oils didn’t offer the low-temperature performance engines needed during the winter. So, many motorists adopted the habit of changing from a heavier oil – SAE 40, for example – to a lighter viscosity as winter approached to ease cold starts and ensure better cold flow. In spring, they changed back to SAE 40 since it offered better high-temperature stability for high-temp summer driving.
It turned out that oils formulated from different crude-oil sources behaved differently in service. For example, when the temperature dropped below freezing, an SAE 20 oil refined from crude oil sourced from the Gulf Coast was much thicker than an SAE 20 oil refined from Pennsylvania crude, some 1,500 miles away. Although they were both SAE 20 motor oils and their viscosities were similar once the engine reached operating temperature, the SAE 20 designation didn’t communicate the difference in winter performance.
Winter-grade oils are born
In 1952, the industry updated its standard to include a set of winter-grade designations denoted by the letter “W.” With the addition, motorists had an idea of how well their oil performed at 0ºF. Soon after, motor oil technology improved enough to introduce multi-grade oils to the market. They offer the best of both worlds – good protection and performance both at startup, when the engine is cold, and once the engine has reached operating temperature. A 5W-30 oil flows quickly when you start the engine, behaving like a 5W oil, while remaining stable at high temperatures, offering the performance of an SAE 30 oil at 212°F.
Old habits die hard
Although multi-grade oils ended the need for seasonal oil changes, many motorists stuck with their maintenance habits, in some part thanks to reinforcement from others. In the 1960s, marketers promoted the 3,000-mile/3-month oil change to time oil changes with the seasons. The quick lube market picked up the idea as a way to keep traffic flowing, touting it as an “insurance policy” for your engine.
Today, improvements in oil performance have rendered the 3,000-mile/3-month drain interval outdated. But many people still love the symmetry and convenience of twice-a-year, seasonal oil changes.
The AMSOIL advantage
AMSOIL offers a synthetic oil for whatever oil-change schedule you prefer. AMSOIL XL Synthetic Motor Oil is great for spring and fall oil changes. It delivers outstanding wear protection and engine cleanliness for up to 10,000 miles/6 months.
For best wear protection, step up to AMSOIL Signature Series Synthetic Motor Oil. It provides 75% more engine protection against horsepower loss and wear than required by a leading industry standard*, extending the life of vital components like pistons and cams.
Not only that, but it performs so well you can drive 25,000 miles/1 year (15,000 miles/1 year in severe service) between oil changes if you want.
*As required by a leading industry standard. Based on independent testing of AMSOIL Signature Series 5W-30, in ASTM D7320 as required by API SN specification.

Bruton Motor Sports
Robert Bruton Independent AMSOIL Dealer
888-658-6669

Sunday, April 16, 2017

New Brake Fluid Products

New DOT 3 & 4 Synthetic Brake Fluid (BFLV), DOMINATOR® DOT 4 Synthetic Racing Brake Fluid (BFR) and Brake & Parts Cleaner (BPC) help boost the performance, safety and reliability of brake systems.
AMSOIL DOT 3 & 4 Synthetic Brake Fluid, AMSOIL DOMINATOR DOT 4 Synthetic Racing Brake Fluid and AMSOIL Brake & Parts Cleaner will launch April 3. These new products are precisely tailored to the needs of auto enthusiasts and dedicated racers. DOT 3 & 4 Synthetic Brake Fluid meets the highest DOT standards (5.1) and is the perfect choice for high-performance passenger-car, light-truck and powersports applications. DOMINATOR DOT 4 Synthetic Racing Brake Fluid features the ultra-high boiling point required during extreme racing conditions. Brake & Parts Cleaner supplies auto enthusiasts and mechanics with a professional strength, dedicated brake and parts cleaner.
AMSOIL DOT 3 & 4 Synthetic Brake FLuid
  • Maximum ABS and traction-control performance: Low-viscosity, specially designed fluid provides improved cold-weather performance and excellent ABS and traction control responsiveness.
  • Firm brake pedal feel: Maintains low compressibility in severe operating conditions, resulting in consistent brake pedal feel.
  • Helps extend the life of essential components like calipers, wheel cylinders, seals, lines, master cylinders and ABS control valves.

AMSOIL DOMINATOR® DOT 4 Synthetic Brake Fluid
  • Provides vapor lock protection through high boiling points.
  • Resists brake fade common in racing applications for a confident brake feel all the way to the finish line.
  • Nitrogen blanket added to avoid moisture absorption and prevent contamination during manufacturing and storage, ensuring top-quality fluid upon purchase.

Recommendations
AMSOIL DOT 3 & 4 Synthetic Brake Fluid is engineered for use in passenger cars and light trucks. It is a DOT 5.1 product, exceeding the specifications of DOT 3 and DOT 4. Additionally, its 5.1 formula provides excellent protection against water contamination. Rather than offer multiple products, we created one formula that performs best in all three applications.
DOT 3 & 4 Synthetic Brake Fluid is also the primary recommendation for powersports applications. However, if a customer consistently pushes his or her brakes to the limit in racing (or similar applications), DOMINATOR DOT 4 Synthetic Racing Brake Fluid is recommended.
Refer to the owner’s manual regarding the proper change interval for your brake fluid and to determine the correct DOT classification. Change AMSOIL DOT 3 & 4 Synthetic Brake Fluid twice a year for maximum performance. Change AMSOIL DOMINATOR DOT 4 Synthetic Racing Brake Fluid once a year for maximum performance.

AMSOIL Brake & Parts Cleaner

New Brake & Parts Cleaner is a professional-strength product that quickly and effectively removes oil, grease, brake fluid and other contaminants from brake parts and other automotive components. It cleans brake parts with no major disassembly and leaves no residue, helping eliminate brake squeal and chatter.
  • Quickly removes grease and oil
  • Leaves no residue
  • Dries quickly
  • Chlorinated, non-flammable formula
  • VOC-free

Applications
  • Brake Parts
  • Brake Pads
  • Calipers
  • Drums and More

Brake & Parts Cleaner (BPC) vs. Heavy-Duty Degreaser (ADG)
Brake & Parts Cleaner and Heavy-Duty Degreaser are both excellent cleaning and degreasing products. If working with painted, plastic or rubber surfaces, we recommend choosing Heavy-Duty Degreaser.

888-658-6669

amsoil brake fluid